JRC NCR-300A Navtex Receiver

This NAVTEX Receiver is JRC NCR-300A We can supply to world wide and we can give service in all  INDIA Ports. Keep in touch with us.

 ELECTRICAL SPECIFICATIONS

NAVTEX RECEIVER UNIT

Receiver

\\n
• Receiving frequency 518 kHz
\\n
• Receiving scheme STRAIGHT
\\n
• Receiving mode F1B
\\n
• Gain Max. character error ratio: 1% at an antenna input of 1µV
\\n
• BK 12 VDC or 24 VDC
\\n
• External alarm interface Open-collector type
\\n
• Max: 500 mA at 35VDC
\\n
• Recommended product: CGC-300A
\\n
• Max. power consumption: 20 mA
\\n
• Audio output level: 85 dB/m
\\n
• Receiving format 7-bit error detection code based on the NAVTEX
\\n
• broadcasting format
\\n

b. Printer

\\n
• Total characters/line 35 or 40
\\n
• Out-of-paper warning Alarm buzzer
\\n
• Operating panel lamp blinking
\\n
• Red end-of-paper line marks on printer paper (the red lines
\\n
• indicate there is one meter or less remaining).
\\n

c. Control switches

\\n
• Power on/off
\\n
• Coast station selection
\\n
• Message type selection
\\n
• Receiver status selection
\\n
• Alarm buzzer manual turn-off
\\n
• Receiver status information printing
\\n
• Brightness control
\\n
• Self-diagnostic tests
\\n
• Paper feeding
\\n

d. Display/indicator unit

\\n
• Power-on indicator
\\n
• Visual alarm on important message receiving
\\n
• Out-of-paper alarm
\\n
• Receiving indicator
\\n

POWER UNIT

\\n
• Input voltage 12 to 24 VDC(Tolerance +30%,-10%)
\\n
• Power consumption (Standby) at 12 VDC: Approx. 4 W
\\n
• (Operating) at 12 VDC: Approx. 6 W (max.)
\\n
• (Standby) at 24 VDC: Approx. 5 W
\\n
• (Operating) at 24 VDC: Approx. 7 W (max.)
\\n

MECHANICAL SPECIFICATION

\\n
•  Minimum and maximum temperature range:
\\n
• Operating: -15 to +55°C
\\n
• Storage: -25 to +75°C
\\n
•  Relative humidity: Up to 95% at 40°C
\\n
• Installation: Wall-mounting, desk-mounting, or ceiling-mountinga
\\n